Individuals typically discuss getting some form of temperature control included with their reverse cycle ducted cooling system. Exactly what are the various kinds of air conditioning temperature control and how do they work? We will take a look at the common kinds of cooling temperature level control systems in Midrand and how they work below.
Standard Air Conditioning Controller
The fundamental controller that includes your reverse cycle air conditioning system comes with a thermostat that reads the air conditioners temperature level. Normally this temperature is read either from the controller itself or more commonly inside the return air box of the system that sits inside the roofing system space.
It is often not an precise representation of the temperature level in the room if the temperature level is read inside the return air box. The room itself might be quite cold however by the time the air is recirculated to the return air box it may have warmed up significantly which indicates the air conditioning system will keep running (e.g. the controller in the living-room is set to 22 degrees but once the air reaches the return air box it has warmed back up to 30 degrees, which in turn causes the air conditioning unit to keep running).
In this circumstance, the unit will keep running although individuals are becoming cold. There are however 2 choices to counteract this. Increasing the temperature level of the controls will cause the unit to cycle off quicker. It needs to be born in mind that the temperature set on the controller is usually not precise, rather it works as a scale (i.e. if you set to 22 degrees, it does not necessarily imply the space will cool to 22 degrees).
Second of all, some people put a ducted fixed constant in their corridor near the return air grille. This constant as it name suggests is constantly on. This permits the conditioned air to return easily back up to the return air box of the system, which helps the system cycle off. In this instance if you were running simply your bedrooms that were all a long way from the return air, the air from the rooms would warm up too much before getting back to the return air. The fixed constant nevertheless would bleed air straight back into the grille which will make the unit cycle off and ultimately save you cash in running expenses.